header
Order Online

click here for 3 Chainwheel Kit Installation

CYCLONE DIY Kit Motor power @ 180W, 250W, 360W, 500W, 650W, 900W, 1200W

CYCLONE MOTOR KIT
INSTALLATION

1 Chainwheel Kit Installation



Use the crank remover to remove the nut from the axle.

Use the crank remover to remove the chain wheel and cranks

Use crank remover to remove the chain wheel and cranks

The distance between the rear wheel and the button bracket must be at least 60 mm

Remove the nut from the button bracket

Remove the Axle from the button bracket and replace it with the longer Axle.

Put the motor¡¦s mounting bracket on the bike frame .

Put the motor on the mounting bracket

Put the chain wheel on the freewheel crank then on the Axle.

Add more chain on the original chain link ( approx.4 links)

Tighten the cranks with the crank remover

Put the chain over the motor¡¦s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CCW motor)

Put the chain over the motor¡¦s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CW motor)

Motor throttle on the right hand side

Gear grip on the left hand side

Plug the throttle plug in to the motor side controller plug

Plug in the battery power cord to the motor¡¦s power cord.

Complete !!!